Nexgrill Grill Parts for Nexgrill Grills from Grill Parts Distributors, the Gas Grill Parts Specialist for Gas Grills.

Nexgrill
Gas Grill Parts from BBQParts.com

For Nexgrill brand gas grills, we only stock and sell cook grids, burners, heat plates, knobs, and igniter parts. All the best selling parts we have are listed below. Un fortunately, we don't stock and sell all the parts for all Nexgrill gas grills.

If you have a part number and you don't see it in parts listings below, try looking it up in our parts database. Click Here.

As an added, look-up convenience, we have prepared a "drop down" list of Nexgrill model numbers that we know and listed the burners and heat plates that each model uses. You can select your model from the drop down list that immediately follows this paragraph.

Nexgrill Model Look Up:

Scroll Down for a Listing of the All the Stainless Steel Tube Burners, Cast Iron Burners and Heat Plates We Stock and Sell for Nexgrill Gas Grills.

One Low Shipping Charge Per Order - Only $9.89 Per Order

For Nexgrill gas grills we only stock and sell:

For Nexgrill gas grills, we DO NOT stock or sell:

� Stainless Steel Cook Grids
� Burners
� Knobs

� Igniters
� Heat Plates

� Hoses
� Regulators

� Valves

Parts

Cook Grids

Price

Replacement Stainless Steel Rod Cook Grid For Some Ducane Models

P/N CG96SS

1 piece: 19 1/4 by 10 3/8 inches

in-stock

Made in the USA. This one piece replacement cook grid is for certain Ducane stainless steel models made after the year 2000. Sold individually. More than one grid is required for each grill. This one piece grid is made of sturdy, solid, 5/16 diameter 304 grade stainless steel rod. Measures 19 and 1/4 inch front to back and 10 and 3/8 inches side to side. Please measure your grid before ordering to verify you are ordering correctly. By ordering here, you will receive one grid. (Three piece set is available, see below CG96SS-3 Pack) Also fits some Nexgrill models, measure carefully.

$85.00
Each

Replacement Stainless Steel Rod Cook Grid Set For Some Ducane Models

P/N CG96SS-3pak

in-stock

Made in the USA. Each of the individual cook grids measures 19-1/4 inches front to back and 10-3/8 inches side to side. By ordering this three pack, you will get coverage of total cooking surface of 19-1/4 inch by 31-1/8 inches. The grids are made of sturdy, solid, 5/16 diameter 304 grade stainless steel rod. Please measure your grid before ordering to verify you are ordering correctly. By ordering here, you will receive a set of three grids. Also fits some Nexgrill models, measure carefully.

$255.00
Set of 3

Stainless Steel Set of Three [3] cook grids

P/N CG110SS

in-stock

Made in USA. This high quality three piece stainless cook grid set is made to fit two models of Sam's Club and Member's Mark grills. Models 720-0691A and 720-0778A. The cook grids are made solid 304 'commercial grade' stainless steel rod. The rod measures 1/4 inch in diameter. By placing an order for one set - you will receive three cook grids - One grid measuring 10 1/4 inch by 17 1/4 inch and two grids measuring 9 3/4 inches by 17 1/4 inches each. We encourage you to measure your cook grids to confirm these will work.

$117.00
One Set of 3 Stainless Steel Cook Grids

Parts

Burners

Price

Stainless Steel Tube Burner [NGTB1]

P/N 10261

in-stock

Stainless Steel Tube Burner. 14 1/4 inches long by 1 inch diameter. (NGTB1)

$11.49
Each

Stainless Steel Tube Burner [CTB1]

P/N 10361

in-stock

This stainless steel tube burner is a replacement burner for a number of Nexgrill gas grill models. The burner is made of high quality, 304 stainless steel, and comes with a wire mesh screen installed at the opening to deter entry and obstruction by insects and spiders. Most of the grills take two to five individual burners. Please select the quantity of burners you wish to order. (MHPCTB1)

$11.49
Each

Three-Pak of Stainless Steel Tube Burners [CTB1-3]

P/N 10361-3

Sold in Quantity of Three Per Order

in-stock

Reduced Quantity Pricing. By ordering one three-pak here, you will receive three of the Stainless Steel Tube Burners with special quantity pricing. The burner is made of high quality, 304 stainless steel, and comes with a wire mesh screen installed at the opening to deter entry and obstruction by insects and spiders. Shipping charge will be the same as ordering one burner. This burner is 16 13/16 inches long.

$34.47
Pack of 3

Five-Pak of Stainless Steel Tube Burners [CTB1-5]

P/N 10361-5

Sold in Quantity of Five Per Order

in-stock

Reduced Quantity Pricing. By ordering one five-pak here, you will receive five of the 10361 Stainless Steel Tube Burners with special quantity pricing. The burner is made of high quality, 304 stainless steel, and comes with a wire mesh screen installed at the opening to deter entry and obstruction by insects and spiders. Shipping charge is the same as ordering one burner. This burner is 16 13/16 inches long.

$57.45
Pack of 5

Stainless Steel Tube Burner [NGTB2]

P/N 10371

in-stock

While Supplies Last.
This stainless steel tube burner has been used in a few models. The burner is made of high quality, 304 stainless steel, and comes with a wire mesh screen installed at the opening to deter entry and obstruction by insects and spiders. It is very similar to the 10361 burner we sell, but it is longer. The 10371 burner is 19 inches long. This burner is one inch in diameter. It has been used primarily in models 720-0133LP and 720-0133NG. Use the list of models below, together with the illustration and length (19 inches long) to select your burner correctly. Most of the grills take 3 to 5 burners. Please select the quantity of burners you wish to order. (10371/BBQNG33/NGTB2)

$11.49
Each

Single Steel Curved Tube Burner [NGB1]

P/N 10801

in-stock

While Supplies Last. Reduced Pricing. This unique, curved, stainless steel burner was used in imported gas grills, mostly the Nexgrill brand. Use our drop down list of Nexgriill models to verify the burner is correct for your grill. This aftermarket replacement for the OEM burner is sold on the web under the part numbers 10801 or NGB1. At the curved end of each burner is a welded threaded bolt. Each threaded bolt comes with a nut for mounting. Please choose carefully using brand and model number. Many imported grills of this era used similarly shaped, but slightly different burners. (NGB1).

$18.49
Each

Stainless Steel Tube Burners [BBQT1] - 3 Pak

P/N 12411x3

in-stock

Reduced Quantity Pricing. By ordering here, you will receive a three-pak of 12411 stainless steel burners with special quantity pricing. These stainless steel tube burners are 16 1/2 inches long. The burner is made of high quality, 304 stainless steel, and comes with a wire mesh screen installed at the opening to deter entry and obstruction by insects and spiders. (BBQT1-3pak)

$23.97
for 3 Burners

Stainless Steel Tube Burners [BBQT1] - 5 Pak

P/N 12411x5

in-stock

Reduced Quantity Pricing. By ordering here, you will receive a five-pak of 12411 stainless steel burners with special quantity pricing. This stainless steel tube burner is 16 1/2 inches long. The burner is made of high quality, 304 stainless steel, and comes with a wire mesh screen installed at the opening to deter entry and obstruction by insects and spiders. (BBQT1-5pak)

$39.95
for 5 Burners

Stainless Steel Tube BURNER [VTB1]

P/N 13001

Sorry, we do not stock or sell this burner.
Replacement stainless steel tube burner. Most grills take two to four individual burners. Please select the quantity of burners you wish to order. (VTB1)

Stainless Steel Burner [JATB1]

P/N 13361

in-stock

Closeout Pricing While Quantities Last. These stainless steel burner could be described as a 'tear-drop' shape. It has a mounting bracket that measures 4 3/8 by 5/8 inches welded to the top of the bend in the burner. (JATB1)

$29.89
Each

Stainless Steel Tube Burner [G431-0300-W2]

P/N 15491

Sorry, we no longer stock or sell this part. You may find it available on other websites.
This stainless steel tube burner measures 14 3/8 inches long. It is one inch in diameter. (CBP6, CBP4, 80009027, G431-0300-W2)

Stainless Steel Tube Burner [80013421]

P/N 15591

in-stock

While Supplies Last. This stainless steel tube burner measures 15 7/8 inches by one inch in diameter. It is used in a few Nexgrill gas grill models. Order the quantity you need. (15591, CBP2, 80005591, 80005703, 80006502, G505-1100-01, G504-0900-01, 80013421)

$11.49
Each

Tube Burner [80016864] [CBP3]

P/N 15641

Sorry, we do not stock or sell this burner.
This tube burner is used in a number of models. 16 15/16 inches long. Please select the quantity you wish to order. (80016864, 80005641, CBP3)

Stainless Steel Tube Burner [CBP10]

P/N 16781

Sorry, we do not stock or sell this burner.
This stainless steel tube burner measures 14 7/8 inches by one inch in diameter. It is used in a few Nexgrill gas grill models. (CBP10)

Stainless Steel Tube Burner [80013421]

P/N 80013421

in-stock

$11.49
Each

Tube Burner [15641] [CBP3]

P/N 80016864

Sorry, we do not stock or sell this burner.
This tube burner is used in a number of models. 16 15/16 inches long. Please select the quantity you wish to order. (80016864, 80005641, CBP3)

Cast Iron Burners [CIT]

P/N 23301

Sorry, we no longer stock or sell this part. You may find it available on other websites. Durable, high quality, cast iron burner has been used for years in grills sold under different brand names. The grills are usually made by Nexgrill and marketed under the brand names of Nexgrill, Jenn Air, Costco, Kirkland, Sunshine and Charbroil. (CIT)

Cast Iron Burner [CIJA]

P/N 26301

We are now sold out of this part and we have discontinued selling it. You may find it on other internet websites.
This cast iron burner is used in many gas grill models - primarily featured in Jenn-Air models. Each burner is 15 13/16 inches long and 2 3/16 inches wide. The burner design is distinguished by the angled top which is approximately 13 1/2 inches long. (CIJA)

The 23301 cast iron burner and the 26301 cast iron burner are very close in size and dimension. We find the main factor as to whether the burner fits or not is the position of the cast iron mounting stud on the underside of the burner. To help customers order the correct burner, we offer two aids. First, to see actual photos with measurements of the position of the stud, click here, and compare it with the burner in the grill. Secondly, if you know your model number, click here for our database on burner and heat plates used in many models. We list the models for which we have information.

BRINKMANN Cast Iron Burner [154-2500-0] [CIKR]

P/N 29351

Sorry, we do not stock or sell this burner.
Cast Iron Burner. This popular Brinkmann replacement cast iron burner is also listed on many websites as part number 29351. Select the quantity you wish to order. (29351, CIKR)(154-2500-0)

Burner Support Rails

Sorry, we do not stock or sell burner support rails.

Burner Crossover Tubes

Sorry, we do not stock or sell burner crossover tubes.

Parts

Igniters

Price

Spark Generator

P/N 03333

in-stock

Closeout Pricing. While Supplies Last.
3-Outlet Aa Spark Generator

$17.50
Each

Generator

P/N 03340

Sorry, we do not stock or sell this part.

4-Outlet AA Spark Generator. [o]

Spark Generator

P/N 03380

in-stock

5-Outlet Aa Spark Generator

$18.99
Each

Electrode and Wire Assembly

P/N IG19B

in-stock

This assembly is an electrode with an 23 1/2 inch wire with a wire insulating jacket. One end of the wire is the electrode end and the other end is a flat spade connector. The ceramic portion of the electrode is 3 and 3/4 inches long. Electrode tip is 1 and 7/8 inches long - to where it takes a 90 degree bend (as shown in the illustration.

$8.79
Each

20 inch Igniter Wire with Two Female Flat Spade Ends

P/N IG18B

in-stock

20 inch igniter wire with 2 female flat spade connector ends.

$3.89
Each

20 inch Wire

P/N IG7B

in-stock

This replacement 20 inch insulated wire is for use with most rotary and push button igniter systems. One end has a female spade connector and the other end has a female round connector.

$4.89
Each

Triple Spade Outlet Electronic Ignition Module

P/N IGEIB3B

in-stock

Triple spade outlet electronic ignition module.

$21.00
Each

Six Pole Electronic Igniter

P/N IGEIB6B

in-stock

Six pole electronic ignitor.

$19.50
Each

Rotary Igniter With Knob, One Outlet [UP-5B]

P/N UP-5B

in-stock

This one outlet, rotary igniter is shipped with the knob included. (UP-5B).

$9.89
Each

Rotary Igniter With Knob, Two Outlets [UP-6B]

P/N UP-6B

in-stock

This TWO outlet rotary igniter is shipped with knob included. (UP-6B, 03220).

$12.89
Each

Rotary Igniter With Knob, Three Outlets [UP-8B]

P/N 03230

in-stock

This three outlet, rotary igniter is shipped with the knob included. (UP-8B).

$15.49
Each

Parts

Knobs

Price

Universal Gas Grill Control Knob.

P/N 02342

in-stock

Universal Knob. Selectable D Position, Socket Dia. (6mm Or 8mm), And Shaft Length (Flush, 0.25 Inch, Or 1.625�. Shatfs Can Also Be Trimmed To Desired Length). Includes Six Inserts (Shafts) And Set Screw. Fits Any Grill With Inside Bezel Dia. Greater Than 2.1875.

$13.89
Each

Rotary Igniter Knob

P/N GGK9

in-stock

This is the replacement Knob only that is used on rotary igniters, igniters that are manually turned by hand to produce a spark. The Knob is 1 and 3/4 inches in diameter. Directional arrows are molded in the plastic facing of the Knob. (20182601, 20173101)

$3.95
Each

One Low Shipping Charge Per Order - Only $9.89 Per Order

Below is a listing of 20 different heat plates that we stock and sell for Jenn Air models. Scroll down to review the heat plate information.

Parts

Heat Plates

Price

Stainless Steel Heat Plate [VCHP1]

P/N 90081

in-stock

Stainless Steel Heat Plate. 17 1/4 by 14 1/2 inches. Most grills take two to four individual heat plates. (VCHP1, 90081).

$27.99
Each

Porcelain Coated Steel Heat Plate

P/N 90681

Sorry, we do not stock or sell this heat plate. There is a stainless steel replacement listed below: 90681-SS.
This porcelain coated steel heat plate measures 15 inches by 4 5/8 inches. The heat plate is used by a number of different grill brands, including Charbroil,Sears/Kenmore, Tera Gear, and Nexgrill.

Stainless Steel Heat Plate [CBHP10]

P/N 90681-SS

Sorry, we do not stock or sell this heat plate. This stainless steel heat plate measures 15 inches by 4 5/8 inches. The heat plate is used by a number of different grill brands, including Charbroil, Sears/Kenmore, Tera Gear, and Nexgrill. (CBHP10)

Porcelain Steel Heat Plate

P/N 90691

Sorry, we do not stock or sell this part.

Porcelain coated steel heat plate.

Stainless steel Heat plate [NGSAMHP1]

P/N 90691-SS

Sorry, we do not stock or sell this part.

This stainless steel heat plate measures 4 7/8 inches by 15 1/4 inches. The heat plate is used in models 720-691A and 730-691A. Some websites sell a porcelain coated steel plate 90691 for these models. The heat plate we supply is made of stainless steel. Order the quantity you need. (NGSAMHP1)

Porcelain Steel Heat Plate

P/N 90821

in-stock

While Supplies Last. This porcelain steel heat plate measures 6 3/8 inches by 12 1/8 inches. It is used in Nexgrill model 720-812A. [n]

$11.49
Each

Porcelain Coated Steel Heat Plate

P/N 91191

We do not stock or sell this porcelain steel heat plate --- switching and now offering a high quality, exact fit stainless steel replacement at a reasonable price - offered below as P/N 91191-SS.

Stainless Steel Heat Plate [NGKHP1]

P/N 91191-SS

in-stock

While Supplies Last. This stainless steel heat plate is used some Nexgrill models. It measures 4 3/16 inches by 15 1/8 inches. It is sold in a porcelain steel version as part number 91191 on some other websites. (NGKHP1)

$11.49
Each

Stainless Steel Heat Plate [NGCHP2]

P/N 91231

in-stock

We have a limited supply of this heat plate in stock - all have some rust spots or discoloration. We have heavily discounted them to 12.00 each while supplies last. Please do not order if you wont be happy.
This stainless steel heat plate is used in a variety of models. Check the illustration and measurements, to verify you are selecting the correct heat plate for your grill. This 91231 heat plate measures 6 3/4 by 17 3/4 inches. Most grills take two to four heat plates. Please select the quantity of heat plates you wish to order. (NGCHP2)

$12.00
Each

Stainless Steel Heat Plate [NGCHP1]

P/N 91241

in-stock

This stainless steel heat plate is used in a variety of models. Most grills take two to four heat plates. Please select the quantity of heat plates you wish to order. (NGCHP1).

$10.89
Each

Stainless Steel Heat Plate [NGSHP2]

P/N 91271

in-stock

This stainless steel heat plate is used in a variety of models. Most grills take two to four heat plates. Please select the quantity of heat plates you wish to order. (NGSHP2)

$24.89
Each

Stainless Steel Heat Plate [NGSHP3]

P/N 91281

in-stock

Closeout Pricing While Quantities Last. Made in the USA. This stainless steel heat plate is used in a number of models. It measures 8 1/4 inches wide by 17 5/16 inches front to back. Most grills take two to five heat plates. Please select the quantity of heat plates you wish to order. (NGSHP3/NGFT28/NG37/93228)

$19.89
Each

Stainless Steel Heat Plate [NGKIRHP2]

P/N 91331

in-stock

While Supplies Last.
This stainless steel heat plate is found mainly in one particular Nexgrill model: 720-0133. However, please use the Nexgrill model drop down list, together with the illustration and measurements (5 1/2 inches by 18 7/.8 inches) to verify you are ordering correctly. Most grills take two to five heat plates. Please select the quantity you wish to order. (NGKIRHP2)

$11.49
Each

Stainless Steel Heat Plate

P/N 91931

Sorry, we are sold out and cannot supply. We have discontinued stocking and selling this part.
This stainless steel heat plate is used in Kirkland and Nexgrill gas grill models. The plate measures 10 5/8 inches by 17 5/16 inches.

Stainless Steel Heat Plate [NGCHP4]

P/N 92341

in-stock

Limited Quantity Available. While Supplies Last. This stainless steel heat plate is used in a number of models. Dimensions of the heat plate are 5 11/16 inches by 17 and 5/16 inches. Most grills take two to five heat plates. Please select the quantity you wish to order. (NGCHP4).

$11.49
Each

Stainless Steel Heat Plate [NGJAHP1]

P/N 92631

in-stock

While Quantities Last. Stainless steel heat plate. Measures 17 11/16 by 7 3/4 inches. Most models take three to five heat plates. Please order the quantity you need. (NGJAHP1)

$11.49
Each

Stainless Steel Heat Plate [NGCHP3]

P/N 93041

in-stock

While Supplies Last. This stainless steel heat plate is used in a number of models. The dimensions of the heat plate are 4 15/16 inches wide and 17 5/16 inches front to back. Most grills take two to four heat plates. Please select the quantity of heat plates you wish to order. (NGCHP3).

$9.89
Each

Stainless Steel Heat Plate [NGCHP3]

P/N 93041-SS

in-stock

$9.89
Each

Porcelain Steel Heat Plate

P/N 93051

in-stock

While Supplies Last. This heat plate is used in some Nexgrill models. It measures 4 15/16 by 17 1/4 inches. [f]

$11.49
Each

Stainless Steel Heat Plate [NGKHP2]

P/N 93051-SS

in-stock

While Supplies Last. This stainless heat plate is used in some Nexgrill models. It measures 4 15/16 by 17 1/4 inches. It is sold in a porcelain steel version as part number 93051 on some other websites. (NGKHP2)

$11.49
Each

Stainless Steel Heat Plate [NGKIRHP1]

P/N 94391

in-stock

Limited Quantities. While Supplies Last.
The stainless steel heat plate measures 5 1/8 inches by 15 3/8 inches. (NGKIRHP1)

$11.49
Each

Porcelain Steel Heat Plate

P/N 94591

We do not stock or sell this porcelain coated steel heat plate because we are able to offer an exact fit, stainless steel replacement heat plate in its place. It is offered below as P/N 94591-SS.

Stainless Steel Heat Plate [NGHP1]

P/N 94591-SS

in-stock

Limited Quantities. While Supplies Last.
On the web there are two heat plates offered for this grill, each made of two different materials. 94591 is made of porcelain coated steel. 94591-SS, is made of stainless steel. Both are the same size: 4 1/4 inches by 13 13/16 inches. By ordering from us, you will receive a stainless steel heat plate. (NGHP1)

$11.49
Each

Stainless Steel Heat Plate [COHP1]

P/N 95131-SS

in-stock

This stainless steel heat plate measures 6 and 1/4 inch by 16 1/2 inches. Angled with peak and holes go down each side. (COHP1)

$12.89
Each

Porcelain Steel Heat Plate

P/N 96791

Sub to Stainless Steel Heat Plate P?N 96791-SS

We have discontinue selling this porcelain costed steel heat plate in favor of high quality, exact-fit, stainless steel replacement heat plate at a very reasonable price. This is offered below as P/N 96791-SS.
We stock and sell a stainless steel version of this heat plate, as part number P/N 96791-SS. Scroll down down to find it.

Stainless steel Heat plate [NGKHP3]

P/N 96791-SS

in-stock

While Supplies Last
This stainless steel heat plate for Nexgrill models measures 5 1/2 inches by 15 1/8 inches. A porcelain coated steel version of this heat plate is sold as P/N 96791. Please order the quantity you need. (NGKHP3)

$9.89
Each

Stainless Steel Heat Plate

P/N BBQHP1

Sorry, we do not stock or sell this part. We have no substitutes.
This stainless-steel, replacement heat plate is 16 1/16 long and 3 11/16 wide. Select the quantity you wish to order.

Stainless Steel Heat Plate

P/N BBQNG336

in-stock

While Supplies Last. This stainless steel heat plate is used in a number of Nexgrill models. The dimensions of this heat plate are 6 inches wide and 17 3/4 inches front to back. Please use the model list, together with the illustration and dimensions to verify this is the heat plate for your grill. Most grills take 2 to 5 heat plates.(BBQNG336).

$8.49
Each

Stainless Steel Heat Plate

P/N BBQNG89

in-stock

While Supplies Last. This stainless steel heat plate is used in a number of Nexgrill models. It measures 4 1/4 inches wide and 13 1/2 inches front to back. Please use the list of models below, together the dimensions, to verify this heat plate is correct for your grill. Most grills take two to five heat plates. Please select the quantity of heat plates you wish to order. (BBQNG89)

$11.49
Each

Hose and Regulators

Sorry, we do not stock or sell any regulators, or hoses, or hose and regulator assemblies.